Trend Pierce and Trim Two Flute Router Cutter 6.3mm 18mm 1/4" in UK Specification







HOME PAGE PRODUCTS





Trend Pierce and Trim Two Flute Router Cutter 6.3mm 18mm 1/4
Home » Power Router Trimming Cutter Bits in UK Specification

Trend Pierce and Trim Two Flute Router Cutter 6.3mm 18mm 1/4" in UK Specification


Power Router Trimming Cutter Bits by Trend



UK Part Nr: 239704 : Power Router Trimming Cutter Bits. Trend Professional 1/4in shank bearing guided pierce and trim cutter - 6.3mm diameter for laminate work 6.3mm diameter X 18mm cutting length pierce and trim cutter for flush cutting laminated apertures cleanly. 1/4in shank and 18mm cutting range; ideal for smaller routers and thinner materials allowing easy control. Cutter has a piercing tip to drill through the laminate and run against the work to make the cut in one go for fast, efficient and clean cutting. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications Shank Diameter: 1/4 Dia Metric: 6.3 Dia Imperial: 1/4 Cut Length Metric: 18 Overall Length Metric: 65. UK specification power router trimming cutter bits by Trend, best UK p

Indicative Price: GBP 28.15
(for Actual Current Price, possibly lower,
please click below)


More Info & Supplier : click here


For more dependable industrial tools, parts & supplies in UK : click here

Try Search on this site - find exactly what you need! Click below:








Visitors interested in this item were also interested in the following:

Trend Combi Trimmer Bearing Guided Router Cutter 24mm 6mm 1/4" in UK Specification
Trend Combi Trimmer Bearing Guided Router Cutter 24mm 6mm 1/4" in UK Specification

GBP 62.93
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 236292 : Power Router Trimming Cutter Bits. A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter. A fine height adjuster is recommended when using this cutter. A larger 20mm bearing will spread the wear of the cutting when 45 degree trimming. Specifications Shank Diameter: 1/4 Dia Metric: 24 Cut Length Metric: 6 Overall Length Metric: 55 Angle: 90. UK specification power router trimming cutter bits by Trend, best UK p

More Details : click here

SEARCH this site : click here

Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2" in UK Specification
Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2" in UK Specification

GBP 55.41
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 251719 : Power Router Trimming Cutter Bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: 50 Overall Length Metric: 102 Overall Length Imperial: 4 1/64 Bearing Dia Metric: 15.9 Bearing Dia Imperial: 5/8 Angle: 90. UK specification power router trimming cutter

More Details : click here

SEARCH this site : click here

Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 18.2mm 14mm 1/4" in UK Specification
Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 18.2mm 14mm 1/4" in UK Specification

GBP 25.33
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 439904 : Power Router Trimming Cutter Bits. Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications Shank Diameter: 1/4 Dia Metric: 18.2 Dia Imperial: 23/32 Cut Length Metric: 14 Cut Length Imperial: 35/64 Overall Length Metric: 54 Bearing Dia Metric: 18.2 Bearing Dia Imperial: 23/32 Angle: 90. UK specification power router trimming cutter

More Details : click here

SEARCH this site : click here

Trend TRADE Bearing Guided Trimmer Router Cutter 9.5mm 12.7mm 1/4" in UK Specification
Trend TRADE Bearing Guided Trimmer Router Cutter 9.5mm 12.7mm 1/4" in UK Specification

GBP 28.15
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 260230 : Power Router Trimming Cutter Bits. For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. Ptfe coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Comes in a re-usable clear tube for protection. Specifications Shank Diameter: 1/4 Dia Metric: 9.5 Dia Imperial: 3/8 Cut Length Metric: 12.7 Cut Length Imperial: 1/2 Overall Length Metric: 63. UK specification power router trimming cutter bits by Trend, bes

More Details : click here

SEARCH this site : click here

Trend Bearing Guided Trimmer Router Cutter 12.7mm 16mm 1/4" in UK Specification
Trend Bearing Guided Trimmer Router Cutter 12.7mm 16mm 1/4" in UK Specification

GBP 30.97
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 235116 : Power Router Trimming Cutter Bits. For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted on end of cutter. Specifications Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imperial: 1/2 Cut Length Metric: 16 Overall Length Metric: 59 Bearing Dia Metric: 12.7. UK specification power router trimming cutter bits by Trend, bes

More Details : click here

SEARCH this site : click here

Trend Economy Trimmer STC Router Cutter 6.3mm 5mm 1/4" in UK Specification
Trend Economy Trimmer STC Router Cutter 6.3mm 5mm 1/4" in UK Specification

GBP 40.37
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 229817 : Power Router Trimming Cutter Bits. Solid Tungsten Carbide economy cutter. Self-guiding 90 degree trimming only with Specifications Shank Diameter: 1/4 Dia Metric: 6.3 Dia Imperial: 1/4 Cut Length Metric: 5 Overall Length Metric: 38 Angle: 83. UK specification power router trimming cutter bits by Trend, bes

More Details : click here

SEARCH this site : click here

Trend Extra Fine Three Flute Trimmer Bearing Guided Router Cutter 12.7mm 51mm 1/2" in UK Specification
Trend Extra Fine Three Flute Trimmer Bearing Guided Router Cutter 12.7mm 51mm 1/2" in UK Specification

GBP 51.69
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 229749 : Power Router Trimming Cutter Bits. Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications Shank Diameter: 1/2 Dia Metric: 12.7 Dia Imperial: 1/2 Cut Length Metric: 51 Cut Length Imperial: 2 Overall Length Metric: 116 Bearing Dia Metric: 12.7 Angle: 90. UK specification power router trimming cutter bits b

More Details : click here

SEARCH this site : click here

Trend Bearing Guided Bevel Trimmer Router Cutter 27mm 9mm 1/4" in UK Specification
Trend Bearing Guided Bevel Trimmer Router Cutter 27mm 9mm 1/4" in UK Specification

GBP 58.23
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 267981 : Power Router Trimming Cutter Bits. Cut a wider edge line, at an angle of 45 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications Shank Diameter: 1/4 Dia Metric: 27 Cut Length Metric: 9 Overall Length Metric: 51.5 Angle: 45. UK specification power router trimming cutter bits by Trend, best UK p

More Details : click here

SEARCH this site : click here

Trend Bearing Guided Trimmer Router Cutter for Veneer 19.1mm 25.4mm 1/2" in UK Specification
Trend Bearing Guided Trimmer Router Cutter for Veneer 19.1mm 25.4mm 1/2" in UK Specification

GBP 59.17
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 263660 : Power Router Trimming Cutter Bits. Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Downcut to prevent breakout on veneer. Specifications Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: 25 Overall Length Metric: 79 Bearing Dia Metric: 19.1 Bearing Dia Imperial: 3/4. UK specification power router trimming cutter bits by Tren

More Details : click here

SEARCH this site : click here

Trend CRAFTPRO Bearing Guided Bevel Trimmer Router Cutter 34.9mm 10mm 1/4" in UK Specification
Trend CRAFTPRO Bearing Guided Bevel Trimmer Router Cutter 34.9mm 10mm 1/4" in UK Specification

GBP 35.67
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 237319 : Power Router Trimming Cutter Bits. Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Specifications Shank Diameter: 1/4 Dia Metric: 34.9 Dia Imperial: 1 3/8 Cut Length Metric: 10 Cut Length Imperial: 25/64 Overall Length Metric: 50 Angle: 45. UK specification power router trimming cutter bits by Tren

More Details : click here

SEARCH this site : click here

Trend Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2" in UK Specification
Trend Bearing Guided Trimmer Router Cutter 19.1mm 50mm 1/2" in UK Specification

GBP 87.37
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 239302 : Power Router Trimming Cutter Bits. Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications Shank Diameter: 1/2 Dia Metric: 19.1 Dia Imperial: 3/4 Cut Length Metric: 51 Cut Length Imperial: 2 Overall Length Metric: 116 Bearing Dia Metric: 19.1 Bearing Dia Imperial: 3/4. UK specification power router trimming cutter bits b

More Details : click here

SEARCH this site : click here

Trend Extra Fine Three Flute Trimmer Bearing Guided Router Cutter 12.7mm 25.4mm 1/4" in UK Specification
Trend Extra Fine Three Flute Trimmer Bearing Guided Router Cutter 12.7mm 25.4mm 1/4" in UK Specification

GBP 38.49
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 230109 : Power Router Trimming Cutter Bits. Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Specifications Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imperial: 1/2 Cut Length Metric: 25.4 Overall Length Metric: 66 Bearing Dia Metric: 12.7 Bearing Dia Imperial: 1/2 Angle: 90. UK specification power router trimming cutter bits b

More Details : click here

SEARCH this site : click here

Trend TRADE Bearing Guided Trimmer Router Cutter 6.35MM 12.7mm 8mm in UK Specification
Trend TRADE Bearing Guided Trimmer Router Cutter 6.35MM 12.7mm 8mm in UK Specification

GBP 23.45
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 226049 : Power Router Trimming Cutter Bits. For trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. Ptfe coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications Shank Diameter: 8 mm Dia Metric: 6.35 Dia Imperial: 1/4 Cut Length Metric: 12.7 Cut Length Imperial: 1/2 Overall Length Metric: 63. UK specification power router trimming cutter bits by Trend, bes

More Details : click here

SEARCH this site : click here

Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 12.7mm 25.4mm 1/4" in UK Specification
Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 12.7mm 25.4mm 1/4" in UK Specification

GBP 23.45
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 254896 : Power Router Trimming Cutter Bits. Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide Tct tips for clean, professional finish on timber lippings, plastic laminates and veneers. 12.7mm diameter X 25.4mm cutting depth bottom bearing guided trimmer. Accurately and cleanly flush trims laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates. Ptfe coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications Shank Diameter: 1/4 Dia Metric: 12.7 Dia Imperial: 1/2 Cut Length Metric: 25.4 Cut Length Imperial: 1 Overall Length Metric: 77 Bearing Dia Metric: 12.7 Angle: 90. UK specification power router tt delivery within UK.

More Details : click here

SEARCH this site : click here

Trend Bearing Guided Bevel Trimmer Router Cutter 20mm 14mm 1/4" in UK Specification
Trend Bearing Guided Bevel Trimmer Router Cutter 20mm 14mm 1/4" in UK Specification

GBP 56.35
(Indicative price - actual current price possibly lower)
Power Router Trimming Cutter Bits in UK Specification
UK Part Nr: 245646 : Power Router Trimming Cutter Bits. Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges. Specifications Shank Diameter: 1/4 Dia Metric: 20 Cut Length Metric: 14 Overall Length Metric: 57 Angle: 80. UK specification power router trimming cutter bits by Trend, best UK p

More Details : click here

SEARCH this site : click here






  • FROM SAME CATEGORY : Power Router Trimming Cutter Bits in UK Specification : click here!

  • PRODUCT LIST : by product category : click here!
    		•
    307-2-RGB




    Try Search on this site - find exactly what you need! Click below:




    Home » Power Router Trimming Cutter Bits in UK Specification
    Item on this page: Trend Pierce and Trim Two Flute Router Cutter 6.3mm 18mm 1/4" in UK Specification

    Home Page Search Products Contact Us Privacy Policy


    Copyright © TechnicalUK.co.uk : 1997 - 2026 : All rights reserved. 140-UNI