Bondloc B577 Fast Curing High Pressure Teflon Pipe Sealant 50ml in UK Specification
Sealing Products by Bondloc
|
UK Part Nr: 215061 : Sealing Products. Bondloc B577 Pipe Seal is a high viscosity thixotropic gel paste which cures rapidly, sealing instantly to 10 bar through its Anaerobic cure system in contact with metals in the absence of air (oxygen). When fully cured it resists pressure up to 350 bar. B577 is not suitable for oxygen systems. Good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol, Acetone and Brake Fluid. Typical applications are in sealing of all types of threaded connections against water, oil, gases and most common materials conveyed by pipes. Specification: Resin: Dimethacrylate.Colour: Yellow.Cure Speed with Activator: <10 minutes.Cure Speed without Activator: <15 mins @ 20��C.Viscosity: >50,000 cps.Gap Fill: 0.05mm to 0.4mm.Flash Point: >100��C.Shelf Life: 12 months @ 20��C.Specific Gravity: 1.09.Max. Operating Temperature: +150��c. Cured Performance: Full Cure Time: 6-12 hours.Typical Breakaway Strength: >6 to <15 N/mm (2).Prevailing Torque: >3 to < 9 N/mm (2).Stgth: >5 to <15 N/mm (2). Size: 50ml.Additional Information: Gasket Type: Pipe Seal Size (ml): 50. UK specification sealing products by Bondloc, best UK price, fast deliver
 Indicative Price: GBP 14.05
(for Actual Current Price, possibly lower,
please click below)
More Info & Supplier : click here
For more dependable industrial tools, parts & supplies in UK : click here
|
Try Search on this site - find exactly what you need! Click below:
|
|
|
|
 |
|
|
|
Bondloc B542 Hydraulic Sealant for Pneumatic Fittings 10ml in UK Specification
GBP 5.59
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 215057 : Sealing Products. Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications: Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100��C.Shelf life: 2 Years @ 20��C.Specific gravity: 1.06.Max operating temp: -55��c to + 150��c. Cured Performance: Full Cure Time: 12 hours.Typical breakway Iso 10964: 15 N.m.Typical prevailing Iso 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break anN.m/15N.m.Bondloc Hydraulic Seal Pneumatic Fittings. Size: 10ml.Additional Information: Gasket Type: Hydraulic Seal Size (ml): 10. UK specification sealing products by Bondloc, best UK price, fast deliver
More Details : click here
SEARCH this site : click here
|
|
|
Bondloc B515 Instant Low Pressure Gasket Sealant 50ml in UK Specification
GBP 13.11
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 215055 : Sealing Products. Bondloc Flange Seal Type B515 is a purple, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Specifications: Colour: Dark Purple PasteFixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: Paste.Gap fill: 0.5 mm.Flash point: >100��C.Shelf life: 12 months @ 20��C.Specific gravity: 1.10.Max operating temp: -55��c to + 150��c. Cured Performance: Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2). Size: 50ml.Additional Information: Gasket Type: Gasket Sealant Size (ml): 50. UK specification sealing products by Bondloc, best UK pri
More Details : click here
SEARCH this site : click here
|
|
|
Bondloc B518 Flexible Gasket Sealant 50ml in UK Specification
GBP 13.11
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 215056 : Sealing Products. Bondloc Gasket Seal Type B518 is a Red, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Use B518 for dressing gaskets, spacers etc. Specifications: Resin: Modified Urethane Acrylate.Colour: Red Paste.Fixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: >3,500,000 cps.Gap fill: 0.5 mm.Flash point: >100��C.Shelf life: 12 months @ 20��C.Specific gravity: 1.13.Max operating temp: -55��c to + 150��c. Cured Performance: Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2). Size: 50ml.Additional Information: Gasket Type: Gasket Sealant��
More Details : click here
SEARCH this site : click here
|
|
|
Bondloc B572 Pipeseal Slow Cure Sealant for Pipes and Fittings 50ml in UK Specification
GBP 13.11
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 215059 : Sealing Products. Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc. Specifications: Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85��C.Shelf Life: 36 months @ 20��c. Specific Gravity: 1.25.Max Operating Temperature: -55��c to + 150��c. Cured Performance: Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m. Size: 50ml.Additional Information: Gasket Type: Pipe Seal Size (ml): 50. UK...
More Details : click here
SEARCH this site : click here
|
|
|
Sealey Black High Temperature Gasket Sealant 200ml in UK Specification
GBP 23.45
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 272515 : Sealing Products. Gasket sealant to replace original gaskets. Used as an adhesive to bond metal, rubber and glass etc. Supplied in a flow controllable power can. Temperature range -50��c to 180��c. Features & Benefits: Gasket sealant to replace original gaskets. Formulated to be waterproof. Seals leaks. Used as an adhesive to bond metal, rubber and glass etc. Flow controllable power can. Temperature range: -50��c to 180��c. Model No. Scs591 Specifications: Model No Scs591 Brand: Sealey Nett Weight: 0.30kg Size: 200ml Power Can. UK specification sealing p
More Details : click here
SEARCH this site : click here
|
|
|
Bondloc B542 Hydraulic Sealant for Pneumatic Fittings 50ml in UK Specification
GBP 19.69
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 215058 : Sealing Products. Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications: Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100��C.Shelf life: 2 Years @ 20��C.Specific gravity: 1.06.Max operating temp: -55��c to + 150��c. Cured Performance: Full Cure Time: 12 hours.Typical breakway Iso 10964: 15 N.m.Typical prevailing Iso 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break anN.m/15N.m.Bondloc Hydraulic Seal Pneumatic Fittings. Size: 50ml.Additional Information: Gasket Type: Hydraulic Seal Size (ml): 50. UK specification sealing products by Bondloc, best UK price, fast deliver
More Details : click here
SEARCH this site : click here
|
|
|
Sealey Orange Multi Gasket Sealant 50ml in UK Specification
GBP 9.35
(Indicative price - actual current price possibly lower)
Sealing Products in UK Specification
UK Part Nr: 229279 : Sealing Products. Immediate low resistance on assembly and cures once confined in the absence of air in close fitting joints. High oil resistance with water and glycol tolerance. Supplied in an easy-to-use concertina applicator. Features & Benefits: Immediate low resistance on assembly and cures once confined in the absence of air in close fitting joints. Ideal for making in-place gaskets on flanged connections. High oil resistance with water and glycol tolerance. Supplied in an easy-to-use concertina applicator. Model No. Scs574 Specifications: Model No Scs574 Brand: Sealey Nett Weight: 0.10kg Size: 50ml Concertina Applicator. UK specification sealing products by Sealey, best UK p
More Details : click here
SEARCH this site : click here
|
|
|
|
|
|
Try Search on this site - find exactly what you need! Click below:
|
|
Item on this page: Bondloc B577 Fast Curing High Pressure Teflon Pipe Sealant 50ml in UK Specification
|
 Copyright © TechnicalUK.co.uk : 1997 - 2026 : All rights reserved. 140-UNI
|
|
